Skip to Content

How to Keep a Kiddie Pool Clean with Salt [7 Steps to Follow]

Taking a bath outdoors on a hot summer day! Who does not like this? We all know kids love it. And kiddie pools are great for outdoor baths. 

But it needs to be kept clean and the water too should be cleansed. Obviously, saying it is quite easy but doing it isn’t. 

How to keep a kiddie pool clean with salt?

Firstly, drain out the previous water. Then clean the pool with a scrub brush in and out. Secondly, add the necessary amount of salt after filling it with fresh water. It depends on the area and dimension of your pool. Finally, check the pH level and keep the pool open. The pH level should be less than 7.2.

Now, let’s get to the main article!

Various Advantages of Using Salt Water to Clean a Pool 

Saltwater not only benefits the kids but also the elders. A few common upsides of saltwater are:


Various kinds of chemicals are used for cleaning regular pools including chlorine and bromine. But, these chemicals are expensive. And maintaining a pool with high expenses is tough. 

Saltwater is way more affordable for people of every class. It takes fewer dollars and gives more benefits in return. Also, it is easier to maintain than normal pools. 


This is the major advantage of using saltwater as a treatment. It disinfects various viruses and bacteria that can affect every skin type. Also, it is more tender for the eyes and skin. 

We all have experienced irritation in the eyes and skin after a swim in pools.  The chlorine in the water causes it.  

But saltwater acts gently on the eyes and skin. This also gives the skin a boost. It helps the skin to cleanse the harmful outer bacteria and moisturize. Also, it does not leave your kids with dry skin cells. 

Lack of Smell

Regular pools that contain chlorine smell of medicine. Older people can get over it but kids are not likely fond of it. But saltwater does not contain any smell. This is why it is also preferable to the kids. 

There are a lot more advantages and benefits of saltwater. Because of these reasons, using saltwater is a very wise option.

Know It Beforehand!

Are you worried about the process? It has fewer complications. Don’t stress yourself as we will guide you through it. Before getting to the salt treatment, you need to know the pH of the water. And how to keep it balanced. The pool would not need much care if the pH is between 7.4-7.6.

Here are some amazing pH meters that will help you to measure the pH of your pool water-

APERA INSTRUMENTS Waterproof pH Tester KitPromised to ensure high response rate 
PH Meter for Water Hydroponics DigitalCompact design makes it easily carryable 

How to Keep a Kiddie Pool Clean with Salt 

Now, we have reached the main part. Here is a step-by-step part we have for you:

Step 1: Getting The Water Out of the Pool

In the first step, clear the pool. So that you can be assured there is no dirt or grass. Empty the pool and let’s get to the next step. 

Step 2: Cleaning the Surface And Walls

Here, you have to thoroughly clean the surface and inner walls with a brush. So that if it contains any kind of germs or algae, it is dead. Then, wait until the pool dries.

Step 3: Refilling Water in the Pool

In this step, refill your pool with fresh water. The cost of filling up pools is definitely much higher than filling up kiddie pools. You can do it for cheap!

After refilling, you have to determine how much salt you have to add to it. The amount of salt varies from dimensions and existing salt levels. Also, how many gallons it can hold.

Step 4: Calculation

Now, calculate the surface area covered by the pool, in relation to its lower base. Lastly, calculate its radius from the center.

Step 5: Testing The pH Level

Now, you have to get test strips to calculate the pH level of the water. Add a little bit of muriatic acid if the pH comes less than 7.2 

Step 6: Adding The Necessary Amount of Salt

Here, let’s show you an example.

Suppose, your pool is 200 gallons and it needs a salt level of 3200 PPM. Here, add 3.5 pounds of salt, while the existing level is 1200 PPM.

Hold on, the procedure is not finished yet!

Step 7: Keeping The Pool Open

Finally, after doing all the work, you need to keep the pool open. So,  the air circulation prevents the growth of algae. 

We have given the necessary steps above. The pH of the water after adding salt shouldn’t be more than 7.2 

Do check the pH level before using it. 

The elders also need refreshment. You already have a kiddie pool for your kids. You can add a sauna to your house as well. It will keep you refreshed.


Question: Can I eat pool salt?

Answer: Well, both pool salt and table salt can be used in the saltwater pool. But pool salt cannot be added to the food that you intake. As it can be harmful to your stomach.

Question: which salt is the best for pools?

Answer: You can use mined salts in your pool. As it contains 95% to 99% of sodium chloride. The higher the purity of the salt, the less likely it is to stain or damage.

Question: What can muriatic acid cause to a pool?

Answer: Well, it balances the pH level of the water. It also kills mold, cleans the rust stains and surface of the pool. In addition, it eliminates calcium deposits.


Now, we have come to an end. Now you understand how to keep a kiddie pool clean with salt. We hope we were able to provide a clear picture to you.

Now, you can enjoy your summer without the kids being harmed. 

Till we meet again!