How to Remove Permanent Marker From Rubber [5 Methods]

Removing permanent markers from rubber might sound like some Rubik’s cube.

It could be done intentionally or unintentionally. 

Depending on the rubber’s surface, we can determine how long permanent ink will last.

Regardless of the reason, your primary objective is to get rid of it.

How to remove permanent markers from rubber?

Using a clean cloth, apply a generous amount of rubbing alcohol, acetone, or commercial stain remover. Check the label of the nail polish remover before using it. Wipe at the marker stain vigorously. Then, rinse with soapy water to remove any solvent residue.

These are just the highlights. I’ve put together a comprehensive handbook just for you.

Let’s get to the better part!

Consider Few Things

The key to removing permanent marker stain is to begin the process immediately. In general, it’s easier to get rid of a mark that’s less set.

The most significant factor is in which rubber surface you want to erase the ink off.

Permanent marker stains on rubber surfaces like laptop covers require special techniques. That’s why you need to know efficient methods for almost all permanent marker stains on rubber.

Methods of Removing Permanent Marker from Rubber

Let me make you familiar with 5 methods to dispel permanent markers from rubber. I assure you that these methods are safe and effective.

Method 1: Rubbing Alcohol

Rubbing alcohol can be said as the most effective and inexpensive product for stain. It can remove stubborn marker stains on different types of surfaces, even rubber. 

For cleaning any rubber surfaces, it requires a clean cloth and rubbing alcohol. Soak the paper or towel in alcohol. If there are minor stains, a cotton ball can be used. Ensure that the cloth and the surface are not over soaked with rubbing alcohol.

It’s also the safest option as it doesn’t cause damage to your skin and the material.

To help you, we’ve tried mentioning some good-quality rubbing alcohol:

Product 1
Product 2

These two products are the best rated when it comes to removing stains.

Method 2: Nail Polish Remover or Acetone

This method is similar to the previous method. Pour a particular amount of nail polish remover on your cloth.

Rub the area carefully and continually do this task until the color starts fading.

If the stain fades, use soapy water to wash the area. Then, let the surface dry.

Always try avoiding using acetone to clean markers from your shoes.

But, acetone in nail polish remover might destroy certain kinds of rubbers. This might result in damaging the material

Method 3: Vinegar and Toothpaste 

Toothpaste and White Vinegar are economical items for treating marker stains. But they’re not as effective as rubbing alcohol or nail paint remover.

To begin, combine equal parts vinegar and toothpaste in a small bowl. Remember, you must have to go with white toothpaste. 

Instead of vinegar, you can substitute lemon juice. It will help almost equally with the Sharpie stains.

Now, go for a paper towel or a soft bristle brush to remove the stains. Rub until black permanent marker stain fades.

By following this, you can get rid of sharpie stains from things like tables, doors, etc

Method 4: Use the Goo Gone Spray

Goo Gone Spray is known as an effective cleaner. They can easily absorb ink and leave no residue behind.

It doesn’t matter if the ink is on the rubber soles of your shoes or your doll’s face. It contains no harmful toxins. So, no need to worry about pets and kids. But start with a little area because you never know how effective it will be.

Remember to spray it directly on the stained area. Then after leaving it for a short period, start rubbing.

Method 5: Some Other Cleaning Substances

In the case of removing stains from flat surfaces, we use different things. Most of us use a piece of microfiber cloth, clean rag, or towel. Rubber shoe soles, on the other hand, aren’t necessarily flat. So cotton swabs will work great in cleaning.

Make sure to have spare clothes or paper towels on hand if you repeat the application. In addition to cleaning products, you will need soapy water to remove any residue.

Some Tips to Look Out For

Here I’ll add some tips that may come in handy while removing the marker. So, let’s have a look.

Tip 1: Use Sanitizer or Hair Spray

If you don’t have rubbing alcohol, use alcohol-based sanitizer or hair spray. Try to use them on the unnoticeable area in the beginning.

Tip 2: Avoid Using Excessive Nail Polish Remover

Using too much nail polish remover may generate an unpleasant odor. So use it wisely. Also, if your skin is sensitive, use acetone with gloves on.

Tip 3: Don’t Use Gel Toothpaste

Avoid using gel toothpaste for the toothpaste approach.`Because it lacks the abrasive ability of a creamy white paste.

Tip 4: Carefully Use the Goo Gone Spray

As a precaution, apply Goo Gone Spray as least as possible. Always be aware of the noxious trait of goo gone and use it safely. 

The above methods must work great. But put on all safety measures. While using these methods, you should think about the surface type.

FAQs

Will permanent markers forever stay on rubber?

Answer: It mainly depends on the type of the rubber. If the rubber surface is very smooth and you rub it repeatedly, the ink fades. But if the surface is rough, it will take time to fade.

How to remove sharpie from phone cases?

Answer: Work the rubbing alcohol with a cotton wool ball in gently circular motions. For a strong stain, get some alcohol and rub over it using your finger and let the stain soak. Then, gently wipe the case again.

Does Acetone remove permanent markers?

Answer: As I’ve mentioned nail polish remover contains acetone which works almost like rubbing alcohol. So, it will work to remove the marker.

Conclusion

That’s everything we had regarding how to remove permanent markers from rubber.

As far as I know, this should help. But you should seek professional assistance if all else fails.

Good luck with the stain removal!