Having a Westinghouse fridge has its own perks. But the issue arrives when you need to reset it. Some people don’t even try doing it thinking it’s too complicated. And others mess it up more because of their lack of knowledge.
How to reset a Westinghouse fridge?
You’ll have to do a hard reset to restore your Westinghouse refrigerator to factory settings. Firstly, turn the fridge off from the main power switch. Then unplug it from the main electricity. After that, wait a few minutes before you plug it back in. That’s all you need to reset your fridge.
I have described all these steps thoroughly in my article. I’ll simply guide you through the process of resetting your fridge.
How to Reset A Westinghouse Fridge: 5 Easy Steps
Westinghouse refrigerators are among the most popular fridges available. They’re recognized for producing high-quality, long-lasting goods.
But just like resetting Beko fridges, even the finest goods require a reset from time to time.
The following methods will help you reset your Westinghouse refrigerator:
Step 1: Turn the Main Switch off
Turn off the main switch on the fridge body. You should find it on the backside of the fridge.
Usually, it’s adjacent to the main power cord.
Step 2: Unplug the Fridge from the Power Outlet
Disconnect the fridge from the electrical outlet. If the electrical outlet has a switch, turn it off. Then unplug the 3 pin plug from the electrical socket.
This will disconnect the fridge from any electricity.
You must be very careful during the procedure. And remember to use rubber gloves when you are unplugging.
Step 3: Reset the Temperature Settings
Locate the control panel and turn the temperature triggers back to their original position. The settings differ depending on the fridge model. The experts recommend maintaining it at 40 degrees Fahrenheit all the time.
That’s usually about level 4 or 5 for a fridge with settings 1 to 10.
Step 4: Drain out the stored electricity
Allow a few minutes for the fridge to cool down. This lets all the stored electricity discharge from the system.
Usually, these refrigerators or fridges have an adapter. This saves it from electrical surges. These adapters have electricity stored inside them. Even after the power source has been turned off.
Allowing it to rest a few moments, lets the excessive energy fade away.
The fridge will lose all its previous settings from the memory. And start a new cycle if it’s completely drained from electricity.
Thus, the system will reset from a fresh start.
Step 5: Reconnect to the Power Outlet and Turn the Switch on
Connect the fridge’s power wire to the wall outlet. If you own a mini-fridge, you can plug it in an extension cord. Then turn on the main switch. Your fridge should now start a fresh cycle.
The fridge should now run in its factory settings. With that, your reset has been done.
Resetting your fridge might not always be the solution to your problem. I’ve compiled a list of fridges that you might find handy for your convenience:
| Product 1 | |
| Product 2 |
Users have given these fridges positive feedback. Take a look at these!
Consider the Following Points:
Resetting the fridge using the above-mentioned method is pretty simple. Yet keeping a few things in mind will help you go through the process smoothly.
Let’s have a look:
- Most Westinghouse Fridge’s main power switch is on the rear side of the fridge. Make sure you turn that off before unplugging your fridge. Also, remember to turn that on after you’re done resetting the fridge.
- Unplugging the refrigerator from the source of electricity is something that many people overlook. Make sure the wire is disconnected from the power source. Along with turning off the switch.
- If your Westinghouse refrigerator isn’t working after you’ve double-checked all of the settings, it might be a power problem. Check the power outlet with some other device if it’s working properly.
Overall, resetting a Westinghouse fridge is very simple just like Haier refrigerators. I hope I could walk you through the process in simple words.
FAQs
Question: Is there a reset button on a fridge?
Answer: Yes, there is a reset button on the fridge. You may use the reset button to return the refrigerator to its original settings.
Question: Why isn’t a fridge not cooling even if it’s running?
Answer: An issue with the cooling coil is the most typical cause of a fridge not cooling. Ice may build up on coils over time, preventing them from working properly.
Question: What causes the Westinghouse refrigerator to freeze?
Answer: This can be caused by the thermal management thermostat not functioning. It often causes the refrigerant system to operate longer than necessary. The fridge will be overly chilly as a result. This will result in your Westinghouse refrigerator freezing.
Conclusion
That’s all I have for you on how to reset a Westinghouse fridge.
One bonus tip for you before you start resetting your fridge. Always avoid wet surfaces and wear rubber shoes before working with electricity.
With that being said, I have reached the end of our discussion. I hope my article was able to address all of your problems.
Goodbye!