The kitchen’s not a place where you can throw in a lot of furniture to make it look stylish. But you can focus on the details to make it look sophisticated. For instance, you can close the gap between the dishwasher and the countertop.
But how do you do it without professional help?
You need wood to cover up the gap. So, measure the gap and then cut wood of that size. Later on, fix brackets in the gap to help support the wood panels. Then join the brackets and the wood panels. Lastly, in order to join them use wood putty.
Well, now that was only the summary of the whole process. Stick around because we have many more details to dig into our article.
Essentials to grab
Before we dive into the process let’s take a look at all the things you’ll need for this process. Remember, it’s always a good idea to gather up all the items before starting the process.
LIST OF ITEMS:
Close the gap between dishwasher and countertop smartly
You can decorate the kitchen with stuff like a sink on the island and a fancy faucet. However, if you also take care of the minor details your kitchen will look flawless.
And one of those details is the gap between the dishwasher and the countertop. So, to help you lift up your kitchen’s ambiance we have written an article to guide you to close the gap.
Step 1: Measure the gap between the dishwasher and countertop
No matter what gap you’re trying to close up. Let it be between a tub and floor tile or dishwasher and countertop, the first task is to measure the gap.
And to measure the gap you’ll need a measuring tape. Simply hold the tape near the gap and it'll tell you the size of the gap.
Now, after you take the measurement don’t forget about it. You’ll need it for later.
Step 2: Cut a piece of lumber to create a wood panel
Next up you need to cut some wood. Although it can’t help the rattling sound of the extractor vent it can surely close up the gap between the dishwasher and countertop.
All you have to do is use a hand saw to cut the wood in the size of the gap. Remember the measurement. This is where you used the pent up knowledge.
And once the wood is done keep it in your hand. We have more work to do with it.
Step 3: Paint over the wood
Next up, is the painting process. The woods that have been cut into the perfect size now need to be painted. So, for this using paint that goes with your kitchen theme.
And once you’re done leave it aside for 24 hours to let the paint dry.
Step 5: Install the bracket into the gap
Now, while the paint dries up you need to install the L-brackets into the gap. This will act as a support for the wood panels.
Back to the installation process; you have to use a screwdriver and some wood screws. With those two secure the L-bracket at a place which is 1 inch below the countertop.
But hold up you’re not done yet. You still have 3 more brackets to install. One will go ½ inch from the front of the cabinet. The other one will go 1 inch above the toe kick. And the last one will be at the center of the space.
Step 6: Attach the wood panel with the bracket
Once the brackets are in place and the wood panels you can start the sixth step. That is placing the wood panels on the brackets.
Now, this step is easy. All you have to do is place the wood panels on the brackets. And your job will be done.
Step 7: Join the joins using wood putty
Lastly, cover up all the joints using wood putty. This will give a nice finishing and you won’t see any openings between the wood panels.
And if you want you can paint over the wood again to give a seamless finishing.
Question: Should flooring go under the dishwasher?
Answer: Yes, flooring should be right under the dishwasher. In fact, it is very crucial for the floor to be under the dishwasher. That’s because the countertop cannot fully contain the weight of the dishwasher. That’s why it needs a sturdy hand to get the job done.
Question: Should a dishwasher be installed by a plumber?
Answer: It’s not mandatory to call a plumber before installing the dishwasher. However, if you do call a plumber you’ll be on the safe side. That’s because they’re experts when it comes to working with sinks and since dishwashers are usually installed near a sink it’ll be great to have them close-by.
Question: Do you need insulation around a dishwasher?
Answer: Yes, it is necessary to insulate the dishwasher because it helps keep the dishwasher warm. Moreover, the dishwasher won’t be so noisy. And for the good news, the insulation layer will disappear as soon as you’re done installing the dishwasher.
Question: How long does it take for a plumber to install the dishwasher?
Answer: To remove the dishwasher a plumber usually takes around 2 hours. However, if the old dishwasher needs to be removed then that’ll take an extra hour. So, in total it’ll be 3 hours to get the job done.
To wrap up
That sums up the process to close the gap between dishwasher and countertop. Now that you know how to get the job done why don’t you try it for yourself.
Once you’re done your kitchen will instantly look more well put. Moreover, your neighbors might end up giving you a compliment the next time they come over.
So give it a try at least. Best of luck!