It is very disgusting when you are about to use your toilet. Then you find scratches on your toilet bowl. On top of that, it’s filthy and you need to get rid of them. You might want to get rid of them.
How to remove scratches from toilet bowl?
You can easily remove scratches from your toilet bowl. Either you can use a pumice stone to remove the scratches. Or you may use home remedies like vinegar and baking soda to remove the scratches on your toilet bowl. Or you can also paint over your toilet bowl and make the scratches vanish.
You must be still pretty blurry about this matter. Don’t worry, I have prepared the whole article to clear your head out.
Jump on and read the detailed article!
3 Methods to Remove Filthy Scratches from the Toilet Bowl
We often use metal brushes to clean up the toilet. And using a metal brush leads to the metalmark or metal scratches on the toilet. Using a plumber’s snake to clean up the clog, can also result in scratches on the toilet bowl.
These metal marks or scratches make your toilet look filthy and disgusting. You might think removing these marks would be a hassle.
But it’s the opposite. Removing these marks could be really easy, like removing black spots from porcelain.
You just need to grab some tools. Then with some guidance, you can easily get it done. There are 3 different methods that you can follow to remove scratches from your toilet bowl.
Tools You Will Need!
Hey, now don’t get worried. You don’t need to buy any expensive tools to remove scratches from your toilet bowl. The job can be done easily with your home remedies. Or you just need to buy one or two things from your local store.
Here’s what you may need to get the work done:
- Pumice stone
- Acid cleanser powder
- Vinegar
- Large sponge
- Breaking soda
- Large towel
- Drywall sandpaper
- Gloves
- Acrylic latex primer
- Epoxy paint
You won’t be needing all of them for all the methods. So, first choose your preferred method then get yourself the required tools.
Here’s below we have described the methods you can try to remove scratches from your toilet.
Method 01: Using Pumice Stone
No matter what method you try you will always need to empty your toilet. Firstly use a towel to cover up the whole surrounding area. By doing that water won’t get on the floor.
Then you need to shut down the toilet’s water supply. You will find that shut-off switch at the back of the toilet. So, find the turnoff bulb, Then you need to rotate it opposite so the water supply is off.
Then you need to empty the tank. To empty the tank all you need to do is hold on to the flash. If the tank is empty then you are ready to go.
Here’s what you need to do, using a pumice stone to remove scratches off your toilet bowl:
- Firstly you need to prepare the pumice stone. You can use your tap water to do the work. Here’s a thing, you need to wet the pumice stone properly. If you don’t wet it properly it can also make some scratches on your toilet bowl.
- Secondly, you need to rub the pumice stone on the scratches mark. You need to add a little pressure on the point. But don’t use too much pressure, it may rub away the finish of the toilet bowl.
- After rubbing the pumice stone your job is done the scratches mark are gone. Then you need to grab a sponge and gently clean your toilet. Your toilet is good to go.
If you don’t have pumice stone at your house. Don’t worry, here’s another method you can try with your home remedy.
Method 02: Using Vinegar And Baking Soda
You might have some vinegar and baking soda laying in your kitchen drawer. These ingredients can help you to remove the scratches of your toilet bowl.
Here’s what you need to do-
- Firstly as we said earlier you need to empty your tank by turning off the water supply.
- Secondly, you need to pour some vinegar into the toilet bowl. You need to cover the whole scratch area with vinegar.
- Then add some breaking soda on vinegar and the scratches area. Try to cover up the whole scratches area with breaking soda. This will mix the vinegar with baking soda.
- Then you need to let it rest for sometime. Let the vinegar and baking soda fizz up. Approximately 30 minutes will be enough.
- Then you need to rub the scratches with drywall sandpaper. Don’t use too much pressure, it may hamper the porcelain finish.
- Then turn on the water supply, also you need to flush the reins out of the toilet. Gently clean your toilet with a towel like you clean windows or glass materials. And the scratches of your toilet bowl are gone. Your toilet is good to go now.
If you want to upgrade your toilet a little. Then here’s another method for you to try.
Method 03: Painting Your Toilet Bowl
You can paint your toilet bowl. It will cover the scratches from your toilet bowl. Also, it will give the toilet a new look. Though you need to buy some primer and paint.
You can consider it for your toilet’s new look, though it can be a little bit expensive. It may sound hassle full but is an easy job to do, it’s more like painting silicone caulk.
Here’s what you need to do:
- Firstly, as described you need to empty your tank. Also, you need to clean up your toilet bowl.
- Then you need to sand it properly. You have to remove the primer of the porcelain toilet.
- Then you have to apply an acrylic latex primer to the toilet bowl. And you can leave it to dry.
- After drying the primer you need to paint your toilet bowl using epoxy paint. And your toilet will be as new as before.
There are many mixed-quality epoxy paints in the market. Don’t get confused when choosing one.
Here are some of the top-quality epoxy paints that we have collected for you:
| Product 01 | |
| Product 02 |
These paints are chosen from customer reviews. And they will do a nice job to remake your toilet.
We have described 3 methods for you and any of these methods will do the trick.
If you can replace the seal on the toilet pipe then this one’s easy as cake for you.
FAQs
Question: Is a magic eraser bad for porcelain?
Answer: No, a magic eraser doesn’t scratch porcelain. You can use a magic eraser safely on ceramic tile and porcelain toilet bowls.
Question: Does bleach damage porcelain toilets?
Answer: Yes, bleach can damage porcelain toilets. Though bleach is generally safe with porcelain. But calorie bleach can oxidise the primer of the porcelain toilet.
Question: Can you use brillo on porcelain?
Answer: Yes, you can use brillo on porcelain. You can remove stains, rust from porcelain surfaces with brillo. It will ease up your hassle.
Bottom Line
That’s all from us. Thank you for reading the whole article. Hope now you know all about how to remove scratches from toilet bowl.
Any of these methods can do the tricks to remove the scratches. But in some cases repeating the process two or three times can be needed.
If your toilet has a big scratch or crack. Before throwing the toilet bowl, you may consult a professional.
Best of luck!