Skip to Content

How to Reset KitchenAid Refrigerator: Do it Effortlessly!

When it comes to reliable and sophisticated home appliances, KitchenAid has always been one of the top brands. 

But no matter how nicely a machine performs, it’ll require some work and maintenance from time to time. Especially something like a refrigerator that runs every second of a day.

Sometimes, even the toughest of problems can be solved by simply resetting a device. 

How to reset KitchenAid Refrigerator? 

Unplug your KitchenAid refrigerator from the power source and let it be for 5 to 10 minutes. If the plug is hard to reach, flip the breaker off in the circuit board to remove power. Then, connect it back to power and that’ll reset the system. Check back to see if your fridge is properly cooling. 

But this is just basic info. Below I’ve broken down everything in detail to help you acquire a clear conception regarding the matter. Scroll down to see!

Resetting a KitchenAid Refrigerator: All the Right Ways!

You may need to reset your refrigerator if it starts to malfunction, or when you need to rejuvenate your old fridge to make it work like new.

If you own a KitchenAid refrigerator and you need to reset it but you’ve never done it before, you’ve come to the right place. 

Requiring to reset or defrost a KitchenAid refrigerator – whatever the issue is, I’m here to show you that these are simpler than you can imagine. 

I’ll be walking you through a detailed guide on how to reset your KitchenAid refrigerator as a whole, as well as ways of resetting the parts separately. 

Keep reading to learn them all!

How to Reset the Whole System

The method I’m about to show works for all KitchenAid refrigerator models. It’s the simplest and the most typical way of resetting most refrigerators. 

Whenever you’ll find your KitchenAid refrigerator not showing optimum performance or functioning properly, follow the steps I’ve explained below:

  • Remove the refrigerator plug from the power source. If your fridge is positioned in a way that the plug point is not reachable, directly remove power by flipping off the breaker in the circuit board.
  • Keep the refrigerator disconnected from power for 5 to 10 minutes. 
  • Plug your refrigerator back or turn on the breaker to bring back power to it. 
  • Be patient while the system reboots after being reset.
  • After a few minutes, check to see if the refrigerator is properly cooling. If it’s an advanced model, check the control panel to see if everything has started functioning.

And that’s it! Your KitchenAid refrigerator has been reset. Simple right?

It’s best to position your refrigerator in such a way that the rear part is accessible. Keep that in mind, especially if you plan on placing your french door refrigerator next to a wall

Using the Reset Button: How Exactly Does it Work

We now know how to reset a KitchenAid refrigerator manually. You might be wondering if there is a reset button that makes the whole process a lot easier.

Yes, there is a reset button. But there’s a catch.

There is a reset button on KitchenAid refrigerators. But only in those models which have an electric control panel. Besides, it’s used to only reset the water filter in your fridge.

There is also a factory reset button on the control panel. But its job is not to reset the system. It’s used to reset all the settings of the control panel back to its original state. 

This means, if you need to reset the whole system, there is no quick button for that. For all KitchenAid refrigerators so far, the only way to do that is the manual method I’ve explained above.

But sometimes you might be facing trouble with one specific part. And resetting that part only would be enough to fix the problem.

And that’s what I’ll be discussing below. Keep reading to know the ways of resetting some specific functions of your KitchenAid refrigerator. 

Resetting KitchenAid Refrigerator Control Panel

If you’re using an upgraded model of KitchenAid refrigerators, it undoubtedly has a control panel/board on one of the doors.

The control panel comes with a lot of extra features, along with the older features with easier accessibility. You can get a lot done only by pressing a few buttons.

You might sometimes find the control panel screen malfunctioning or not displaying properly. And this kind of situation calls for a reset. 

How to reset the control panel? Don’t sit confused. Just follow the simple steps below:

  • Take a good look at the buttons on the control panel to find the ‘Holiday’ and the ‘Freeze’ button. 
  • Press on both of these buttons at the same time and hold on to them for about 8 to 10 seconds. 
  • Wait for the screen to completely clear up. Once it does, you can consider that your control panel has been reset. 

As simple as that! After the reset, you’ll hopefully be able to operate the control panel without any disturbance. 

Resetting KitchenAid Water Filter & Refrigerator Alarm

KitchenAid refrigerators have water filters installed in them. It’s quite convenient as you’re getting pure drinkable water from the same appliance that you’re using to keep your food items fresh.

Water filters require frequent maintenance and replacement. There is a light on the display panel of KitchenAid Refrigerators that notifies the user whenever servicing is necessary.

On that note, here are some of the best electric water filters currently trending in the market in case you’re looking:

Product 1
Product 2

Sometimes the water filter status light malfunctions, which can be solved by resetting it. 

Here are the steps for resetting the KitchenAid Refrigerator water filter or filter light:

  • Locate the ‘Max Cool’ and the ‘Max Ice’ button on the control panel. Press both buttons together and hold for 3 seconds. 
  • Upon seeing an icon flash on the display and hearing a sound, you can be sure that the reset was successful.

And that’s all you’ll need to do for resetting the KitchenAid Refrigerator water filter or filter light. But what to do if you require resetting the refrigerator alarm?

The alarm is a brilliant feature that notifies the user when the refrigerator door is not properly sealed or anything else is malfunctioning. Just like when you easily know there is voltage overload when a breaker trips.

Sometimes the alarm itself malfunctions by going off and continuously beeping. To stop that, you can try resetting the alarm. Below are the steps for doing it:

  • Conduct a system reset by keeping the refrigerator unplugged from the power source for about 10 minutes. Then connect it back and hopefully, the alarm will not ring anymore. 
  • If the above step doesn’t work, try using the factory reset option. Click on ‘options’ on the control panel and go to ‘settings’. There you’ll find the ‘factory reset’ option. Confirm by pressing on ‘yes’. 

And the beeping has stopped and your KitchenAid alarm has been reset with these few easy steps!

That’s all!


Question: Why is my KitchenAid control panel displaying ‘PO’?

Answer: KitchenAid control panel showing PO is the power outage indicator that notifies you by flashing when there is no power supply and the temperature rises up to 18°F or more. 

Question: What is the recommended KitchenAid refrigerator temperature?

Answer: The recommended KitchenAid refrigerator temperature is 37°F. It is also the ideal one, otherwise you may face problems.

Question: How to defrost the KitchenAid Bottom freezer?

Answer: Press and hold the door light switch closed to enter the ‘forced defrost mode’. Then press the temperature button down 3 times. 

Final Thoughts

That’s all I had in my bag regarding how to reset KitchenAid refrigerator, so it’s time to wrap up. 

I’ve tried my best to provide you with all the necessary information in the simplest of manners for an easy understanding. Hopefully, you’ll be able to easily follow the steps and get the job done. 

If you find my DIY content useful, then stick around for more!